Single-Storey Rear Extension, Surbiton, KT5

Project Overview

A rear extension in Surbiton: a conservatory replaced with a room for every season.

In short: Vita Modular designed and built a 16.3m² single-storey rear extension on a detached Victorian house in Surbiton, KT5, in the Royal Borough of Kingston upon Thames, for £61,063 on a fixed-price contract — delivered in seven weeks on site under permitted development.

The back of the house had a dated lean-to conservatory that was too hot in summer and too cold in winter. Vita demolished it and its slab, then built a fully insulated extension across the rear, projecting 3 metres and joined to the kitchen through a 4.93-metre structural opening. A 4.2-metre run of grey aluminium bi-fold doors opens the new dining and family space to the garden, and herringbone flooring runs through the extension. With a base extension rate of around £3,050 per square metre, it is a useful benchmark for anyone pricing a single-storey rear or conservatory-replacement extension in south-west London, Surrey or elsewhere in the UK.

  • Location: Surbiton, KT5 — Royal Borough of Kingston upon Thames, south-west London
  • Configuration: Single-storey rear extension — 16.3m² open-plan dining and family space, projecting 3m across the rear of a detached house
  • Build Type: Ground screws carrying a hot-rolled steel primary frame and prefabricated insulated timber frame panels; flat roof; white silicone render
  • Structural Work: Conservatory and slab demolished; 4.93m structural opening into the kitchen; additional steelwork for a 4.2m clear span
  • Glazing: 4.2m grey aluminium bi-fold doors across the rear elevation
  • Approvals: Permitted development — no planning application required; building regulations approval managed by Vita Modular
Single-storey rear extension with white render and grey aluminium bi-fold doors on a detached Victorian house, Surbiton KT5
Type:
Rear Extension
size:
16.3m²
Use:
Kitchen, Dining & Lounge
PROJECT VALUE:
61,063
DURATION:
7 Weeks
location:
Surbiton, KT5

HOW WE DID IT

01. Design & Approvals

Vita Modular’s in-house design team planned the extension across the rear of the house, projecting 3 metres from the original rear wall and joined to the kitchen through a 4.93-metre opening. The brief was a single open-plan kitchen, dining and family space that opens fully to the garden — so the standard 3-metre glazing allowance was upgraded to 4.2-metre bi-fold doors, with the steel frame designed for the wider clear span.

At 3 metres deep on a detached house, the extension sits within permitted development, so no planning application to Kingston was needed; building regulations approval was secured before work started. The 4.93-metre beam, the frame and the foundations were designed by Vita Modular’s in-house managed structural engineer.

02. Demolition & Structure

Work began by demolishing the old conservatory and breaking out its slab. The extension stands on ground screws driven to a minimum depth of 1.5 metres — no mass concrete strip foundations — carrying a hot-rolled steel primary frame bolted back to the existing masonry, with prefabricated insulated timber frame panels installed on site to form the walls and flat roof.

The build was delivered in a seven-week programme on site, with staged payments at contract signing, works commencement and practical completion.

03. Opening Up the Kitchen

The key structural step was a 4.93-metre opening across the back of the house, supported on a steel beam, so the kitchen and the new dining and family space read as one room. Additional steelwork in the extension frame gives a 4.2-metre clear span for the bi-fold doors.

  • Conservatory demolished and slab removed
  • 4.93m structural opening into the kitchen on a steel beam
  • Additional steelwork for a 4.2m clear span to the bi-folds
  • 4.2m grey aluminium bi-fold doors
  • Herringbone flooring to the extension; kitchen floor overlaid in ply and finished in LVT

04. Finish & Handover

Outside, the extension is finished in crisp white silicone render with a slim flat-roof edge and external wall lights, sitting cleanly against the yellow stock brick of the original house. Inside, herringbone flooring runs through the extension, and the existing kitchen floor was stripped, overlaid with 18mm ply and finished in new LVT so both spaces sit flush with no step. Recessed downlights and pendant lights over the dining table complete the room.

The extension was handed over complete and signed off by building control, at a project value of £61,063 on a fixed-price contract, seven weeks after work started on site.

Dining area in the rear extension with grey aluminium bi-fold doors to the garden and kitchen island, Surbiton KT5
Kitchen with island opening through a wide structural opening into the extension and bi-fold doors, Surbiton KT5
Star icon

4.2m Bi-Fold Doors

Star icon

A 4.93m Opening

Star icon

Herringbone Throughout

Scope of works & key facts

  • Project type: Single-storey rear extension replacing a conservatory
  • Location: Surbiton, KT5 — Royal Borough of Kingston upon Thames
  • Property: Detached Victorian house
  • Project value: £61,063 fixed price
  • Base rate per m²: Around £3,050 (base extension, excluding project-specific works)
  • Build programme: 7 weeks on site
  • Size: 16.3m²; 3m projection from the original rear wall
  • Structure: Ground screws (minimum 1.5m deep), hot-rolled steel primary frame, insulated timber frame panels
  • Structural work: Conservatory demolished; 4.93m opening on a steel beam; extra steel for 4.2m clear span
  • Glazing: 4.2m grey aluminium bi-fold doors
  • Finishes: White silicone render, herringbone flooring, LVT to existing kitchen
  • Approvals: Permitted development (no planning application); building regulations approval
  • Warranty: 10-year structural warranty

One open-plan room, open to the garden all year.

Where there was a draughty conservatory, the house now has a 16.3m² insulated dining and family space joined to the kitchen through a 4.93-metre opening, with herringbone floors and 4.2-metre bi-folds opening onto the lawn.

Delivered in a seven-week build programme on a fixed-price contract, under permitted development, and signed off by building control. Vita Modular designs and builds rear and conservatory-replacement extensions across Surbiton, Berrylands, Tolworth, Kingston upon Thames, Long Ditton, Thames Ditton, New Malden, Surrey and south-west London — and nationwide across the UK.

Dining area in the rear extension with grey aluminium bi-fold doors to the garden and kitchen island, Surbiton KT5
Kitchen with island opening through a wide structural opening into the extension and bi-fold doors, Surbiton KT5

Before & After

Before
Rear of the detached Victorian house in Surbiton KT5 before the extension, with a lean-to glass conservatory
After
Dining area in the rear extension with grey aluminium bi-fold doors to the garden and kitchen island, Surbiton KT5

Technical Drawings

Ground floor plan of the rear extension in Surbiton KT5, showing the dining and family space with bi-fold doors and the wide opening into the kitchen

Layout at a glance

  • Dining / Family — 16.3m²: Projects 3m from the original rear wall, with a dining table for six, recessed downlights and bi-fold doors to the garden.
  • Structural Opening: 4.93m opening on a steel beam joins the extension to the kitchen.
  • Glazing: 4.2m aluminium bi-fold doors across the rear elevation.
  • Kitchen: Existing kitchen floor levelled with ply and finished in LVT to meet the extension flush.

Structure

Ground screws to a minimum depth of 1.5m carry a hot-rolled steel primary frame and prefabricated insulated timber frame panels, with the 4.93m beam and 4.2m clear span designed by Vita Modular’s in-house managed structural engineer.

We’re so pleased with our new extension! It’s made such a difference to our home, especially having all that extra light and being able to enjoy the garden from inside. The whole space feels bigger, brighter and much more practical for everyday family life. Vita Modular did a brilliant job, and the finished result is even better than we imagined. We honestly wish we’d done it sooner!

Homeowners — single-storey rear extension, Surbiton, KT5
Watch the video testimonial with the client:

How much does a single-storey rear extension cost?
This 16.3m² single-storey rear extension in Surbiton, KT5 cost £61,063 on a fixed-price contract, delivered in a seven-week build programme. The base extension was priced at around £3,050 per square metre including VAT, covering foundations, the structural steel frame, external walls, silicone render, a flat roof, painted walls and ceilings, electrics and lighting, flooring and 3 metres of aluminium glazing. The final figure adds the project-specific works: demolishing the old conservatory and slab, a 4.93-metre structural opening, extra steelwork for a 4.2-metre clear span, an upgrade to 4.2-metre aluminium bi-fold doors, herringbone flooring, and new LVT flooring to the existing kitchen. Every Vita Modular extension is priced individually against survey and specification, and fixed before work starts.

How much does an extension cost per square metre near London?
As a guide from this project, the base rate for a single-storey rear extension in Surbiton, south-west London, was around £3,050 per square metre, covering foundations, frame, walls, render, roof, decoration, electrics, lighting, flooring and standard glazing. Project-specific works are priced on top: here, a conservatory demolition, a 4.93-metre structural opening, wider bi-fold doors and flooring upgrades brought the total to £61,063. The main factors are size, the width of the opening into the house, glazing, demolition, site access and the level of finish.

How long does a rear extension take to build?
This 16.3m² rear extension in Surbiton was built in seven weeks on site, including demolishing the old conservatory and forming a 4.93-metre structural opening. Before that, Vita Modular offers a guaranteed four-week lead time from contract for manufacturing and procurement, so a single-storey extension like this can go from signed contract to handover in around three months once approvals are in place. Staged payments are tied to visible milestones from contract signing through to practical completion.

Do I need planning permission for a rear extension in Surbiton?
Not always — this Surbiton rear extension was built under permitted development, so no planning application to the Royal Borough of Kingston upon Thames was needed. It projects 3 metres from the original rear wall of a detached house, well within the 4-metre permitted development limit for detached homes, and meets the height and materials conditions. Extensions beyond those limits need prior approval or full planning permission, and permitted development can be restricted in conservation areas. Vita Modular’s in-house design team confirms the right route at design stage, and building regulations approval is needed either way.

Do I need planning permission for a single-storey rear extension in the UK?
Many single-storey rear extensions in England do not need planning permission because they fall under permitted development. As a rule, a single-storey rear extension can extend up to 3 metres from the original rear wall of a semi-detached or terraced house, or 4 metres on a detached house, with a maximum height of 4 metres, eaves no higher than 3 metres within 2 metres of a boundary, and materials similar to the existing house. Larger extensions of up to 6 or 8 metres may be possible through the prior approval process. Permitted development rights do not apply to flats or maisonettes and can be restricted in conservation areas or by planning conditions.

Can you replace a conservatory with an extension?
Yes — this Surbiton project started by demolishing the old lean-to conservatory and removing its slab, then replacing it with a fully insulated single-storey extension with a flat roof. Unlike a conservatory, the new room stays warm in winter and cool in summer, is signed off under building regulations, and adds year-round living space rather than a room used only in good weather.

Does a rear extension need building regulations approval?
Yes — a single-storey rear extension that adds habitable space needs building regulations approval. Building regulations cover the structure and foundations, the structural opening and steel beam, insulation and energy performance, ventilation, drainage and electrical safety. On this Surbiton project Vita Modular managed building control through to completion.

Can you remove the back wall of a house for an open-plan kitchen?
Yes — this Surbiton extension opens the kitchen to the new dining and family space through a 4.93-metre structural opening across the back of the house. The beam and the steelwork for the extension’s 4.2-metre clear span were designed by Vita Modular’s in-house managed structural engineer, so the kitchen, dining area and garden now work as one open-plan space.

What foundations and structure are used for a modular rear extension?
This Surbiton rear extension is built on Vita Modular’s standard system: ground screws driven to a minimum depth of 1.5 metres, carrying a hot-rolled steel primary frame that supports prefabricated insulated timber frame panels. The frame and foundations were designed by Vita Modular’s in-house managed structural engineer. Ground screws avoid mass concrete strip foundations, keeping excavation and spoil to a minimum.

Can you match new flooring through the existing kitchen?
Yes — on this Surbiton project the extension has herringbone flooring, while the existing kitchen floor was stripped, overlaid with 18mm ply to level it with the extension, and finished in new LVT, so the floor runs flush from the kitchen through to the bi-fold doors without a step.

What makes this Surbiton extension stand out?
The defining move on this Surbiton extension is a 4.2-metre run of grey aluminium bi-fold doors across the full width of the new room, paired with a 4.93-metre opening that joins it to the kitchen. White render sits cleanly against the yellow stock brick of the detached Victorian house, and a herringbone floor gives the new dining and family space a warm, classic finish.

Who builds house extensions in Surbiton and south-west London?
Vita Modular is a UK design-and-build house extension company working across Surbiton — including Berrylands, Tolworth and Southborough — as well as Kingston upon Thames, Long Ditton, Thames Ditton, New Malden, Chessington and the wider Royal Borough of Kingston, Surrey and south-west London area, and nationwide across the UK. One team handles the whole project: survey, design, planning, structural design, building regulations, fixed-price contract, construction and handover, backed by a 10-year structural warranty. This 16.3m² rear extension, delivered in a seven-week build programme for £61,063, is a typical example of the work.

benefits

Our modular buildings are designed, engineered and built to perfection

10 Year Warranty

We’re so confident in the longevity and performance of our structural steel frame modular buildings that we offer an industry-leading 10 year guarantee as standard.

Lead time

We are proud to offer an industry-leading guaranteed 6 week lead time from the date of order.

Bespoke

Our distinctive range of exterior cladding finishes and architectural embellishments is quite simply unparalleled. There are no limits to the space we can create for you.

One Price; No Hidden Extras

Our price includes everything from delivery, installation, foundations, doors & windows, painted walls, electrics, lighting and flooring, to name just a few.

Built to UK Building Regulations

Our modular buildings comply with all aspects of current UK building regulations, so you not only have complete peace of mind that your extension is built to last but you also have a space that can be comfortably used all year round.

Designed & Built in the UK

We use the most advanced modular construction technology to precision craft every modular building at our Warwickshire production facility.

Our Turnkey Process

How our Design & Build Process Works

From your first enquiry to the moment we hand over the keys, our six-step process is designed to be transparent, efficient, and built around a fixed price commitment.

Step 01

Enquiry

Complete our customer enquiry form for an instant fixed price so we can fully understand your project requirements. One of our dedicated team members will contact you to arrange a design consultation.

2 weeks
Step 02

Planning & Design

Where planning permission is required, our in-house design team prepares and submits all necessary drawings and supporting documentation on your behalf.

12 weeks
Step 03

Contract

We'll issue a fully regulated JCT fixed price contract covering our terms and conditions, technical drawings, agreed payment plan, and a committed installation date — giving you total cost certainty and peace of mind.

1 week
Step 04

Manufacture

Our team begins manufacturing at our Warwickshire production facility to hand-craft your modular project, and books in our installation crew for the agreed date.

4 weeks
Step 05

Installation

Around a week before the agreed install date we'll confirm any final arrangements. Our installation team arrives on the morning of your install date, ready to build.

6 weeks avg
Step 06

Handover

We complete final snagging and walk you through your new space, providing all completion and compliance certifications — including full building control sign-off — before handing over the keys.

Ready to start? Get your instant fixed price today.

Get a Quote
GET A QUOTE
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Close

Did you find what you were looking for?

We want to make sure you have all the information you need about Vita Modular.

If you didn't find what you were after, or if you have any questions, please don't hesitate to get in touch.

Contact Options: